Using Xperience

Exhibitor onboarding runbook

How a host, an appointed organiser, exhibitor managers and booth crew set up and run lead scanning for an event such as AI Horizon 2026.

Labels and wording below follow the Work home, exhibitor and visitor-sharing changes recorded in the changelog for 4 October 2026. They apply once those changes are rolled out. Rehearse the whole chain with real inboxes and phones before exhibitors arrive.

This runbook covers one chain: the host appoints an organiser, the organiser invites each exhibitor company, the company's manager invites booth crew, and crew scan visitors who chose to share their details. Admission scanning at the door is a different job. See the AI Horizon entrance guide for it. A booth lead scan never checks a visitor in.

Who does what

PersonRole in XperienceWhere they workWhat they can do
Event Host (for AI Horizon, Tech Dome Penang)Owner or administrator of the host organisation that owns the eventpartner.xperience.my StudioAppoint the organiser, revoke the appointment, publish the event.
Event Organiser (appointed, for AI Horizon, Century)Member of the appointed organiser company, designated on the appointmentpartner.xperience.my Studio, then the event's Exhibitors pageInvite each exhibitor company by email, set its booth and instructions, revoke an unanswered invitation, see aggregate booth activity. Cannot see private visitor contacts.
Exhibitor ManagerOwner of the exhibitor company. Whoever accepts the company invitation becomes this.xperience.my/work (Exhibitor work), then partner.xperience.my/exhibitorAccept the company invitation, scan, invite and manage crew, view crew performance, work leads, export leads.
Manager (optional, invited by the Exhibitor Manager)Company member with the manager roleSame as aboveScan, see crew performance and all leads, export leads. Cannot invite or remove crew.
Booth crewCompany member with the staff role, assigned to the eventxperience.my/work (Exhibitor work)Open the booth scanner. See only the leads they captured or were assigned.

Three rules hold throughout:

  • An invitation is bound to the email address it was sent to. Only an account signed in with that exact, verified email can accept it.
  • Personal webmail (Gmail and similar) is allowed. Xperience does not block domains. A work email is still best because people change jobs.
  • Every action is checked against current roles when it happens. Being invited, or having a link, is not authority.

1. The host appoints the organiser

Skip this step if the host runs the event's exhibitors directly. A host owner or administrator can invite exhibitors without appointing anyone.

Request the appointment

In Studio, open Find an organiser, then the Appoint organiser tab. Search for the host event and for the published organiser company. Choose Host event and Organiser company, tick I confirm the event and organiser company shown above., then choose Request appointment.

No email is sent. The request appears in the organiser company's workspace and lapses after seven days if nobody answers.

The organiser company accepts

An administrator of the organiser company opens Studio, Find an organiser, then Proposals & appointments. The pending request shows Accept and Decline. Choose Accept.

The organiser company designates its people

Accepting does not give every team member access. On the accepted appointment, use Assign team to choose the organiser team members who will run the event. Only those people can open the event in Studio. It then shows under Appointed events on their Events page.

The host can choose Revoke appointment at any time. The organiser's event access ends then, and a company invitation the organiser sent that has not been accepted yet can no longer be accepted. Companies that already accepted keep their booth. Check the event's Exhibitors page afterwards.

2. The organiser invites each exhibitor company

Open the Exhibitors page

In Studio, open the event, then Exhibitors. The page shows Invite company, the list of Invitations and the exhibitors already assigned.

Invite one company at a time

Fill in Company, Contact email, Booth and Instructions, then choose Invite company. Use the email address the exhibitor manager will actually sign in with. Instructions appear on the manager's booth card, so put load-in and booth-set-up information there.

Use one contact per company. If two people at the same company need to run the booth, the first manager invites the second as crew in step 4.

Check the delivery result

Read the line under the button before moving on.

  • Invitation emailed to name@company.com. The email was handed to the mail provider. Ask the manager to check spam if it does not arrive.
  • Invitation saved, but the email could not be sent. The invitation exists, but nothing was emailed. Tell the manager to sign in at xperience.my/work with that exact email. The invitation is waiting there.
  • A red message such as An invitation is already pending for this email. Nothing new was created. Wait for the answer, or choose Revoke invitation on the pending row and invite again.

What you typed stays in the form when the invitation is refused, so you can correct it.

Track the answer

Each row in Invitations shows the email, the status and an expiry such as "Expires 11 Oct 2026". Invitations last seven days. After that the row shows Expired, and you invite the same email again to send a fresh one. Revoke invitation withdraws one that is still pending.

Fix a booth later

Further down the page, each exhibitor has Booth, Instructions and Active assignment. Choose Save assignment after changing them. An exhibitor whose assignment is not active cannot use the scanner, so untick it only to switch a company off.

3. The Exhibitor Manager accepts

The manager receives an email with the subject "AI Horizon 2026: invitation to exhibit as" followed by the company name. Its button opens Exhibitor work.

Sign in with the exact invited email

Go to xperience.my/work. Sign in with an email code, or Google if it is offered, using the address the invitation was sent to. A different address, or a Google account with a different email, cannot see or accept it.

On a new account, finish the short profile set-up when asked. You return to Work afterwards.

Find the invitation

At the top of Work, Exhibitor invitations lists each company with its event, your role and "Expires ...". Choose Review and accept. This opens Exhibitor work.

A person with only exhibitor roles sees only the Exhibitor work card on Work. A person who also helps run an event sees two cards, Event work and Exhibitor work. Someone with no role yet sees Event work, where the crew join code and open opportunities are.

Accept

Under Invitations, choose Accept. If you already own a company on Xperience, a Use company control lets you attach this event to it. Leave it on Create a new company on acceptance to start a new company profile named in the invitation.

The invitation moves to accepted, and the booth appears under Assigned booths with your booth, instructions and role. You are now the Exhibitor Manager for that company at that event.

4. The manager invites crew

On the booth card in Exhibitor work, choose Manage team and leads. It opens the exhibitor page on partner.xperience.my for this company and event.

Invite

Under Team, enter Crew email, choose Invite role and choose Invite staff. Use Staff for people who only scan. Use Manager for a deputy who should also see performance and export leads. Only the company owner sees this form.

The same delivery messages as in step 2 appear. Crew also use their own email, one per person. If two people share one account, performance figures and each person's leads are meaningless.

Watch who has joined

Waiting to join lists pending and expired crew invitations with the email, role and expiry. An expired one says "invite again to resend". Invite the same address again.

Crew accept

Each crew member signs in at xperience.my/work with the exact invited email, opens Exhibitor work and chooses Accept on the invitation. The booth then appears under Assigned booths with Open booth scanner. Crew do not see Manage team and leads.

To change a person later, find Manage and their name in the team list. You can change Team role (Staff or Manager), untick Assigned to stop them scanning at this event, or tick Remove to remove them from the company, then choose Save.

5. Test before the doors open

Do this on the day before, with the same phones and network as the show floor.

Prepare a test visitor

Use a registered test visitor with a confirmed ticket for the event, such as a staff member's own ticket. The visitor opens their ticket (or their event page), chooses Share details with exhibitors and opens the Share your details with exhibitors page. Tick the consent box, fill in Name, Email and whichever of Company, Job title and Phone (optional) apply, then choose Save privacy settings. The page confirms Sharing is on.

Scan from a crew phone

On a crew phone, open Exhibitor work, choose Open booth scanner, then Scan with camera. Hold the visitor's ticket QR inside the frame. A shared visitor shows New lead captured and Contact shared with the visitor's name, email, company, job title and phone. Choose Scan next, scan the same ticket again, and you should see Repeat visit: already in your leads.

Test a visitor who has not shared

Turn sharing off for a second test ticket, or use one that never shared, and scan it. See "What crew see" below.

Check the manager's view

On the manager's phone or laptop, open Manage team and leads. The test visitor appears under Leads, and the crew member's row in the team table shows one lead and two interactions.

Test leads stay in the company's lead list and in its exports. There is no delete control. Set their Status to Closed with a note, or use dedicated test tickets, so they are easy to filter out. Scanning is online only, so run the test on the real venue connection and on mobile data as well.

What crew see at the booth

The scanner screen is headed Scan visitor lead and carries the event, the company and the booth. It says "Lead capture only; this does not grant event admission."

ResultWhat it meansWhat to do
New lead captured with Contact sharedThe visitor chose to share. Their details are saved as a lead for your company.Talk to them, then choose Scan next.
Repeat visit: already in your leadsThis visitor was already one of your company's leads. The scan counts as another interaction.Nothing. It does not create a duplicate lead.
No lead captured: "Contact details have not been shared. Ask the visitor to open their ticket, tap Share details with exhibitors, then scan again."The visitor has a ticket but has not turned sharing on. Nothing about them is shown.Ask them to do exactly that, then scan again.
No lead captured: "This is not a valid Xperience visitor QR."The code is not an Xperience ticket QR.Ask for the QR on their event ticket.
No lead captured: "This visitor does not have an active event registration."The ticket is for another event, or the registration is cancelled or refunded.Send them to the registration desk.
"Reconnect before scanning. Visitor lead capture is online only."The phone has no connection.Reconnect. Nothing is queued for later.

Visitors can switch sharing on or off at any time on the event's privacy page. A visitor who switches it off after you scanned them disappears from your Leads and from later exports.

How visitors share their details

Visitors do not need an app. They sign in on xperience.my, open their ticket, and choose Share details with exhibitors. They can reach the same page from their event page. A visitor who is signed out is asked to sign in and is brought back. A visitor must be registered for the event to switch sharing on.

Tell visitors at the entrance that sharing is optional and per event, and what is shared: name, email, company, job title and an optional phone number.

6. Running the show: performance and leads

The Exhibitor Manager and any invited Manager open Manage team and leads on a booth card.

  • Crew performance. The team table lists each person's Name, Role, Leads (different visitors they captured) and Interactions (every scan, including repeats). A role marked "(unassigned)" cannot scan at this event.
  • Leads. Each lead shows contact details, status, number of interactions and when it was captured and last scanned. Use Search leads by name, email or company. Update Status (New, Contacted, Follow-up, Closed), Notes, Follow-up at and Assigned staff member, then choose Save lead.
  • Visitor survey. Everyone on the company team sees per-question totals of the event's visitor survey below the leads, once at least 10 visitors have answered. Totals only: no individual answers, written answers or highest/lowest numbers.
  • Crew view. Booth crew can update only the leads they captured or were assigned, and cannot reassign leads.
  • Export. A company owner or manager chooses Export leads to download a CSV with Name, Email, Company, Job title, Phone, Status, Follow-up and Notes. The company must first have a saved exhibitor survey response for this event; otherwise CRM shows Complete survey to download while the survey is open. It respects the current search. The export holds only visitors whose sharing is still on at that moment. A file you have downloaded cannot be recalled if someone later withdraws consent, so treat it as personal data.

The organiser sees only aggregate booth activity on the event's Exhibitors page, never visitor contacts.

7. Collect the exhibitor outcome survey

The organiser manages the exhibitor survey in Studio → event → Surveys. A new unsaved exhibitor survey starts with the MATRADE-aligned questions; a saved survey keeps its existing fields, and choosing the template button asks before replacing questions. The organiser must set it to Open before companies without a response can submit answers and download their lead CSV. If the company has no response, a Draft, Closed or missing survey blocks CSV download until the organiser opens or reopens it.

To prepare the survey, open its card, review the MATRADE-aligned questions, select Open, then choose Save exhibitor survey. For a saved survey, choose Use MATRADE exhibitor template only when you intend to replace its current questions; the organiser is asked to confirm replacement. Opening a survey does not send a notification, so tell exhibitors when it is ready.

The exhibitor company owner or assigned manager then follows this sequence:

  1. Sign in and open Work → Exhibitor work.
  2. Under the correct company's booth assignment, choose Manage team and leads.
  3. In CRM, choose Complete survey to download. The company, contact and booth are filled in; complete the required questions.
  4. Choose Save answers and continue to download.
  5. On the saved confirmation, choose Download CSV, or Back to CRM to return to the same company and event. Any lead search filter is retained.

If the company already has a saved response, choose Export leads directly; answering again is optional while the survey is open. A bookmarked CSV download also checks completion and sends an unanswered company to the survey.

Each company has one response per event, from its owner or manager. Existing responses remain valid and count even when the response was submitted before later questions were added, or when the survey is now closed or was saved as a draft. Question changes do not relock a company with a response. Booth scanning, lead capture, CRM viewing and lead updates remain available under their own role and consent rules. Staff can scan and work their permitted leads, but cannot submit the company survey or export its CSV. Organiser survey-response exports are unchanged.

Troubleshooting

The manager cannot see or accept the invitation. The most common cause is signing in with a different address. The refusal reads "This invitation is not available to this account. Sign in with the exact email address it was sent to, or ask the sender to invite you again." Check the address under the manager's account, or have the organiser invite the address they actually use. Invitations are never forwardable. Another message, "Verify your email address to see and answer invitations sent to it.", means the email on the account is not verified yet.

The invitation has expired. It lasts seven days, and a lapsed one shows "Expired" with a date. Accepting says "This invitation has expired or already been answered". The sender invites the same address again, from the event's Exhibitors page for a company, or the Waiting to join list for crew.

No email arrived. Read the warning the organiser saw after inviting. If delivery failed the sender should already have asked the person to sign in at xperience.my/work. If it said "sent", check spam first, then ask the sender to Revoke invitation and invite again.

"An invitation is already pending for this email". One live invitation per address per event. Wait for it, revoke it, or let it expire.

The sign-in code does not arrive or is rejected. At a busy venue many people share one Wi-Fi address. Sending is allowed 10 times a minute and checking a code 20 times a minute per address, and a code locks after three wrong tries. Wait a minute, request one new code, and use only the latest. Switching that phone to mobile data takes it off the shared address.

There is no Exhibitor work card. Work shows the card only for people with an exhibitor invitation or booth assignment. Check that the invitation was accepted on the right account, and, for crew, that the manager has not unticked Assigned.

The scanner says "You are not assigned to this company or event." Ask the Exhibitor Manager to check the crew member's assignment and to confirm the company's Active assignment is ticked on the event's Exhibitors page.

"The camera could not start." The scanner asks for permission when you choose Scan with camera. If it was refused earlier:

  • iPhone and iPad: in Safari, tap the page-settings control in the address bar, choose Website Settings, set Camera to Allow, then reload. If the page is open inside another app's browser, open it in Safari.
  • Android: in Chrome, tap the icon at the left of the address bar, choose Permissions, set Camera to Allow, then reload. Check that no other app is using the camera.

If the camera still will not start, use the Visitor QR code field to paste the ticket code, which only works when the visitor can copy it from their ticket.

"Reconnect before scanning." Lead scanning needs a live connection and does not queue scans. Venue Wi-Fi shared with thousands of visitors is often the weak link. Keep mobile data on and switch to it if the page hangs. Do not close the scanner mid-scan. If a result never appeared, scan again. A repeat counts as an interaction and never as a duplicate lead.

"Too many scans in a short time. Wait a moment, then scan again." Each signed-in crew member has their own allowance of 120 scan requests a minute, so one person's burst should not block others. If a person is blocked, wait about a minute. A person who is not signed in shares an allowance by address, so sign in before the show.

"Your session has ended. Sign in again, then scan." Sign in at xperience.my/work with the same email and return to the scanner.

The scanner says it is unavailable. The booth link is incomplete or no longer valid. Return to Exhibitor work, then choose Open booth scanner from the booth card.

Before the doors open

  • The host has appointed the organiser, the organiser has accepted and the right team members are assigned.
  • Every exhibitor company shows an accepted invitation. Chase any that read pending or expired.
  • Every booth shows Active assignment, a booth and instructions.
  • Every manager has invited their crew, and each crew member has accepted and opened Open booth scanner on their own phone.
  • A consented test ticket scans to New lead captured. A non-consented one gives the guidance to share details.
  • Crew know to ask visitors to share, and visitors know where to do it.
  • Mobile data is available at every booth as a fallback to venue Wi-Fi.

On this page